This test/lab-sized infrared oven is equipped with a 26 in. (66.1 cm) wide x 56 in. (142.3 cm) long conveyor belt. The standard 25 in. (63.5 cm) infeed can be expanded with an optional 10 inch conveyor extension. A 27.75 in. (70.5 cm) wide chamber infeed allows loading of larger items.
At 56 in. (142.3 cm) long and 32 in. (81.3 cm) wide overall, the unit fits on tabletops or on utility carts with tops as small as 30 in. (76.2 cm) square, and is available with an optional mobile stand. Total footprint is about 12.5 sq. ft (1.2 sq. m).
It is available in 120V or 240V models, and comes equipped with a 16 in. (40.1 cm) long by 20 in. (50.8 cm) wide, 2,050 watt (2.05 kW) heater that carries the Vastex 15-year warranty.
Variable controls for both heat intensity and conveyor speed allow fine-tuning of the drying process according to the application, desired cure temperature, and dwell time.
The heater can be raised, lowered and pivoted using lock knobs on the sides of the heating chamber to accommodate irregularly shaped items, for uniform curing using minimum energy. Heater shields are included as standard to maximize edge-to-edge temperature consistency for increased image quality.
An optional exhaust hood removes moisture and fumes ideal for working in confined spaces, especially when curing adhesives.
A Teflon®-coated fiberglass belt with alignment tracking system is standard. Several mesh belts for high-heat and/or sanitary applications are optional.
|Heater Warranty||15 Year|
|Defect Warranty||3 Year|
|Belt Speed||0.6 - 7.4 FPM (0.18 - 2.3 MPM)|
|Exhaust (Free Air)||N/A|
|Exhaust (Powered Optional)||177 CFM (5 CMM)|
|Exhaust Diameter||4" (10.16 cm)|
|Overall Length||56" (142.3 cm)|
|Overall Width||32" (81.3 cm)|
|Overall Height||24" (61 cm)|
|Belt Width||26" (66 cm)|
|Chamber Length||18" (45.8 cm)|
|Chamber Infeed Width||27.8" (70.5 cm)|
|Chamber Infeed Height (adjustable)||2" -7" (5 - 17.7 cm)|
|Heat Range (@ Heater)||0-750° F (0-399° C) @ 120 or 240V|
|Heater Size||16" x 20" (40.6 x 50.8 cm)|
|Total Wattage||2,050 Watts (2.05 kW)|
All ovens 50/60HZ
|120V / 16.5A / NEMA 5-20P
240V / 8.2a / 1 Ph. / NEMA 6-15P
|Electrical Connection||Cord set included|
|Optional Power||208V / 8.2A / 1 Ph. / NEMA 6-15P|
|Conveyor Belt Material||Teflon® coated fiberglass standard, Kevlar® mesh, Food grade, and other TPI available. (Limit 550°F/288°C)|
|**All amps shown are FLA (Full Load Amps), not recommended line size! Ovens on this page must be hard-wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles 210.20(a), 215.3 and 310 of the NEC code.|