The EconoRed ER-III-30 high-capacity oven with a 30 in. (76.2 cm) wide conveyor belt, has been re-engineered to cure or dry at higher rates, in a smaller footprint, at lower cost and more quietly.
The three 24 in. (61 cm) wide, heaters (total 10,800 watts or 10.8 kW) feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing and come with a 15-year warranty.
Equipped with the Vastex Infrared Focusing System, the heaters can be adjusted to any height from 2 to 7 in. (5.1 to 17.7 cm) above the belt, or at an angle, to accommodate large or bulky items.
The oven features a top-mounted exhaust system that draws in filtered air and cools the outer skin of the oven while a powerful 388 CFM (11 CMM) exhaust system evacuates moisture and fumes from the heating chamber.
EconoRed ovens are supplied as standard with a digital PID temperature controller accurate to +/-1°F (+/-0.5°C); the control box can be positioned on the right (standard) or left side of the enclosure to suit plant layouts.
Overall conveyor length of the Teflon®-coated fiberglass belt is 105 in. (266.7 cm) and a low friction belt aligner and belt speed controls precisely set dwell times from 35 seconds up to four minutes.
A Teflon-coated fiberglass belt with alignment tracking system is standard. Several variations of mesh belts for high-heat and/or sanitary applications are optional.
The capacity (belt speed) of LittleRed®, EconoRed™, and BigRed® 4D Series (shown) conveyor ovens can be doubled or tripled as new or when needs increase by simply adding one or two modular heating chambers and extending the conveyor belt. This eliminates the need to invest in a larger oven than you need at the onset, and avoids the high cost of purchasing a new oven when your needs increase.
MODEL | ER-III-30 | ER-III-30-2 | ER-III-30-3 |
---|---|---|---|
Heater Warranty | 15 Year | 15 Year | 15 Year |
Defect Warranty | 3 Year | 3 Year | 3 Year |
Belt Speed | 1.8-23.6 FPM* (0.6-7.2 MPM) |
1.8-23.6 FPM* (0.6-7.2 MPM) |
1.8-23.6 FPM* (0.6-7.2 MPM) |
Belt Torque | 100 in-lb | 100 in-lb | 300 in-lb |
Exhaust (Free Air) | 388 CFM (11 CMM) | 2 @ 388 CFM (11 CMM) | 3 @ 388 CFM (32.3 CMM) |
Exhaust Diameter | 8" (20.4 cm) | 8" (20.4 cm) x 2 | 8" (20.4 cm) x 3 |
Overall Length | 105" (266.7 cm) | 159" (403.9 cm) | 213" (541.1 cm) |
Overall Width | 45.2" (114.8 cm) | 45.2" (114.8 cm) | 45.2" (114.8 cm) |
Overall Height | 60.9" (154.7 cm) | 60.9" (154.7 cm) | 60.9" (154.7 cm) |
Belt Width | 30" (76.2 cm) | 30" (76.2 cm) | 30" (76.2 cm) |
Heater Width | 24" (61 cm) | 24" (61 cm) | 24" (61 cm) |
Recommended Curable Width | 18" (45.8 cm) | 18" (45.8 cm) | 18" (45.8 cm) |
Chamber Length | 54" (137.2 cm) | 108" (274.4 cm) | 162" (411.5 cm) |
Chamber Infeed Width | 34.5" (87.7 cm) | 34.5" (87.7 cm) | 34.5" (87.7 cm) |
Chamber Infeed Height (adjustable) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) | 2" - 7" (5 - 17.7 cm) |
Heat Range (@ Heater) | 0-900F° (0-482C°) @ 240V | 0-900F° (0-482C°) @ 240V | 0-900F° (0-482C°) @ 240V |
Total Wattage | 10,800 Watts (10.8 kW) | 21,600 Watts (21.6 kW) | 32,400 Watts (32.4 kW) |
Electrical Specs All ovens 50/60HZ |
240V / 50A / 1 Ph. / 3 wire or 3 Ph. / 29A / 4 wire |
240V / 100A / 1 Ph. / 3 wire or 3 Ph. / 58A / 4 wire |
240V / 87A / 3 Ph. / 4 wire |
Optional Power | Also available in 3 phase - 380V / 440V / 480V / 600V | ||
Unit Weight | 540 lbs (245 kg) | 1,015 lbs (460.4 kg) | 1,490 lbs (675.9 kg) |
Conveyor Belt Material | Teflon® coated fiberglass standard, Kevlar® mesh, Food Grade and other TPI available. (Limit 550°F/288°C) | ||
All amps shown are FLA (Full Load Amps), not recommended line size! Ovens on this page must be hard-wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles 210.20(a), 215.3 and 310 of the NEC code. |